The importance of toilets cannot be stressed enough. As toilets have become a very critical part of man’s everyday lives, so does their maintenance—proper maintenance ensures that your toilet is working properly whenever you need it. A malfunctioning toilet not only causes hassle, but utter embarrassment as well.

Another thing that can affect the furnace is the state of the vents. If the vents are blocked, there is no way for waste products to leave the furnace, which can spell trouble for the entire heating system. The conditions of the gas lines and the duct lines will also play a role.

If these components are now in a bad shape, it becomes important to call efficient Utah heating contractors. These contractors will know if your furnace is still repairable or has to be replaced. They also have the experience and the equipment necessary to do the job right.

http://www.esconow.com/2014/01/reputable-heating-contractor-salt-lake-city-can-help-furnace/

One of the items that must be checked is the furnace. Every furnace in Salt Lake City provides the much needed heat that allows families to have a comfortable time at home. The malfunction of a component in the furnace means a day spent in the cold, which is never a good thing in a city that hits an average low of 27 degrees in January.

One of the things that must be considered is the age of the furnace. If the furnace has served the house for more than 15 years, it is a good time to shop for a new one. Total dependence on the thermostat and high energy bills are also telltale signs that your furnace is having problems and must be checked immediately.

http://www.esconow.com/2014/01/cold-weather-will-require-great-salt-lake-city-furnace-conditions/

Another part of the furnace that must be checked is the blower and the motor. If the belt is in poor condition, it is important to change it to maximize the efficiency of the machine. The blower motor should also be oiled to help keep the motor running smoothly.

However, there can be occasions where the furnace simply breaks down. If your furnace is not acting in response to the changes you made to your thermostat, you should hire a service that does efficient SLC furnace repair. They can tell if your unit is merely having a wire problem or is about to have a major failure.

http://www.esconow.com/2014/01/good-furnace-repair-utah-contributes-lot-comfortable-winter/

If you think you can opt for a heater/cooler right away without considering insulation first, think again. It’s a known fact that a house must be built of quality materials, and this includes a well-insulated envelope. There are many types of building insulation, like acoustic, fire and thermal, to name a few.

Winter is a cold and unforgiving season; the low temperatures characteristic of the season can make comfort impossible for certain households. Thus, heating systems are often in heavy use during this period, stabilizing indoor temperatures so that the occupants don’t freeze their pants off or get sick. Like all forms of machinery, however, heating systems can be susceptible to breakdowns and flaws, and homeowners should be able to respond to such problems quickly before the cold becomes too unbearable.

Heating systems are an essential component in maintaining the comfort levels of a home during winter. The cold weather can be too much for some, and there’s always the risk of freezing. Fortunately, heaters can balance indoor temperatures and keep homeowners safe from the glacial conditions. 

The weather has somehow lightened up in Salt Lake City, and the more favorable conditions compelled you to check and discover that your furnace suffered damage over the long period of time that it was on. You know the signs of a failing furnace and have seen them all in yours. In an effort to try to save it, you go out and look for a reliable heating contractor.

Like all other service-oriented industries, heating contractors are plenty in a cold city like Salt Lake, where wintertime lows can hit the 20’s. As a consumer, you want to find the service that makes the most out of your money, and it’s understandable. In order to find the right contractor for you, there are some things that you must take note of.

First of all, look up on all the details that concerns your furnace such as researching the licensing and insurance requirements for contractors in Utah and knowing your current furnace model down to the last detail. It will help you sift through the services available a lot easier. Secondly, ask for referrals. A service recommended by the people you know and trust can only mean that the service is likely to deliver on its promises.

A good heating contractor will make a full inspection of your heating system and should give you a written, itemized estimate of the expenses. Taking the above considerations to mind should help you find the right contractor to solve your heating needs.

Imagine having had a nasty brush with a light to moderate case of carbon monoxide (CO) poisoning. The experience may have given you an epiphany about installing CO detectors at home for better forewarning in case of another emergency in the future. However, these devices are only as effective as how they are set up—there are effective ways to put CO detectors in your home for maximum coverage.

According to the International Association of Fire Chiefs, at least one CO detector should be installed at every floor of the house, but where exactly on the floor is the question. For instance, the detector should be active in your bedroom, where the loud alarm can rouse you while sleeping. Some experts suggest within ten feet of the door, which can give you enough time to scramble fast. Bathrooms are off-limits to CO detectors.

If a CO detector is to be set up in the kitchen, the device cannot be within 15 feet of any heat-operative appliances such as gas stoves. A detector should also be set up in the garage, as many homeowners tend to run their cars on idle for long periods of time, leading to a CO buildup.

It is never fun at all to suffer a slow-lingering death and other fates are often quick. In the case of the home, there’s no faster fate than to die of asphyxiation by carbon monoxide (CO), a tasteless gas generated through the burning of fuels such as wood or petroleum. Studies have shown that at least 500 Americans die from CO poisoning every year.

There are situations when the CO comes from a gas-powered furnace that has been improperly set up. So how you stave off the danger of becoming another CO-poisoning statistic?

The symptoms of a CO-poisoning include headache, fatigue, nausea, and rapid loss of consciousness. One sign of a potential CO poisoning is when you regain your full breathing after you safely creep out of the house then the symptoms kick in once you get back inside. Take note of some warning signs in the house structure include moisture buildup inside windows, loose soot from the chimney, and possible blockages inside the chimney itself.

To prevent the danger of a CO poisoning, especially during times of cold weather, you must have a preferred contractor inspect the entire HVAC system, plus any fuel burning appliances. The contractor should also check the ductwork and the flues for leaks and blockages.

Even when you have an effective HVAC system in play at home, it is prudent to keep on your toes for signs of CO poisoning. Proper action can save your life.

When the mercury starts to plummet, homeowners turn up the heat with the help of their furnace. Sometimes though, even with the furnace on, some rooms can stand to be warmer, while others are downright cold. If you plan to tackle this problem by donning a jacket instead of calling a heating contractor in Salt Lake City, think again. According to an article from Stuff.co.nz, low indoor temperature can cause health problems among children. If you have an elderly living at home with you, the cold impedes their mobility and makes them more likely to fall and sustain injuries. Low temperatures can also sap their strength and aggravate existing problems like arthritis. While you only use your furnace a few months out of the year, it gives much needed comfort when the year’s coldest season arrives. For you and your family’s well-being, have your furnace inspected and repaired by an expert Salt Lake City heating contractor like ESCO Home Services.

http://www.esconow.com/2013/12/guard-health-winter-call-salt-lake-city-heating-contractor/

The furnace is the acknowledged heart of every heating system. There are many furnace makers out in the market, each one with their own strengths and drawbacks, as well as differing modes of energy generation. So how will you know which furnace will be suitable for your home? There are some factors to account for:

Power sources will be a major issue in the selection and will often be determined by the accessibility of your community to certain power sources. For instance, the selection can steer towards gas or heating oil-powered furnaces if the community is serviced by an existing utility line.

Efficiency is measured by how much of the fuel is converted into heat, as determined by an annual utilization efficiency rating (AFUE) on the furnace label. An AFUE number of 90 indicates that 90% of the fuel is used up as internal heating.

The size of the unit you need is measured in terms of British thermal units per hour (BTU). It usually requires a professional to measure the dimensions and insulation of each room, plus the level of air filtration.

Your preferred contractor can calculate all the heating variables and find the proper furnace model for you. With a good contractor’s help, you will have a furnace that effectively generates enough heat for your home without costing too much.

Summer is but a distant memory, the trees have shed all their leaves, and snow has begun to fall—indeed, winter is just around the corner. Even before it officially starts though, Utah was already whipped by a snow storm, as this article from The Salt Lake Tribune reports. Weather events like these—and the impending arrival of winter—mean that residents are once again relying on furnaces to keep their homes warm. Since a furnace is used only a few months out of the year, many homeowners don’t keep it properly maintained and think that as long as it lights up, it’s okay. However, not paying attention to your furnace may cause it to give out in the middle of winter or even endanger your family. If you see or hear any of these problems, get furnace repair in Utah immediately

http://www.esconow.com/2013/12/see-hear-problems-get-furnace-repair-utah-immediately/

There are but a few things more precious to a family in the dead of winter as sufficient heating. However, neglecting the maintenance needs of your efficient furnace in Salt Lake City just might cause it to fail right when you need it the most. To keep this from happening, you should check that the components are still in good working condition. Here are some tips on checking one such part: the ignitor. What It Is An ignitor is the main component that begins the heat-generating aspect of your furnace. Generally, there are two types: the older pilot light system, and the more advanced electric hot surface ignitors. The former uses a continuous connection to the gas in the furnace, whereas the latter makes use of an electrical generator and filament.

http://www.esconow.com/2013/12/winter-upkeep-furnace-salt-lake-city-gas-ignitor-problems/